Home > Notice of Letting > Contract Detail

April 26, 2024 Letting 12:00 PM
033-64L95

Bulletin Description

Patching, milling, and resurfacing on IL 75 from 0.2 mile East of Moate Rd to 0.4 mile East of Meridian Rd.
Region District DBE % VBP % Federal Project #
2 2 3.00 0.00 STPFZXY(299)
County(s) Key Route(s) Marked Route(s) Section(s) State Job #(s) PPS #(s)
  • Winnebago
  • FAP 505
  • IL 75
  • (W-15D,115)RS-4
  • C-92-018-17
  • 2-31025-0100
Contract Specifics
40 Working Days
No More Contract Specifics

Ask Subscribe Questions and Answers (6 Submitted / 6 Answered ) Questions not accepted as of April 16, 2024 04:30 PM.

  • How will Butt Joints be paid for, for Incidental HMA Surface Areas?
    It is covered in the general notes: The existing hot-mix asphalt on private and commercial entrances shall be bladed off or milled and disposed of outside the project limits. This could be the entire entrance or tapered at the end depending on if the mainline is resurfaced or milled and resurfaced. The cost of the blading, milling, rolling, and disposal is included in the contract unit price for INCIDENTAL HOT-MIX ASPHALT SURFACING. (04/16/2024)

  • If this project is to be a mill and fill per the specs will patching take place prior to the milling operation?
    Patching will need to be completed before the milling operation. (04/12/2024)

  • Per the Joint Trimming special provision on page 3 of the special provisions joint trimming is required at both the centerline seam and the shoulder seam prior to the next pass. The typical section only show joint trimming being required at 4 different grouping of stations on the seam between the shoulder and driving lane. What will be required on this project?
    Joint trimming will be required for the shoulder only. Plan quantities reflect this. (04/12/2024)

  • On page 2 of the special provisions under Maintenance of Traffic it states that "milled pavement shall be resurfaced before opening the road to traffic". Is this the intent of this project? To mill and fill the roadway, or will the milled pavement be able to be open to traffic prior to resurfacing?
    Once the pavement is milled, the roadway must be resurfaced before traffic can drive on it. (04/12/2024)

  • Have RPM Removal but no item for new ones.
    No new RPMs are being placed on this contract. (04/05/2024)

  • I think I needed 2 seat belts for my tumblr driving this road. Would a IL19.0 binder be a better binder on this job?
    District 2 would accept a 9.5 coarse graded mix as an equivalent substitution for the 9.5FG and could be used in the 1.25" lift. (04/03/2024)

Authorized Bidders

  • 5112 Rock Road Companies, Inc.
    301 W B-R Townline Road
    Janesville, WI 53546
    P.O. Box 1818
    Janesville, WI 53547
    Phone: (608) 752-8944 Fax: (608) 365-1113 Email: bids@rockroads.com
    $1,979,787.70 is within a reasonable approximation of the Estimate

  • 1045 Civil Constructors, Inc. d/b/a/ Helm Civil
    2283 Bus Hwy 20 East
    Freeport, IL 61032
    PO Box 750
    Freeport, IL 61032
    Phone: (815) 235-2200 Fax: (815) 235-2219 Email: civilestimating@helmgroup.com
    $2,242,839.92

  • 1305 Curran Contracting Company
    286 Memorial Court
    Crystal Lake, IL 60014
    Phone: (815) 455-5100 Fax: (815) 455-7894 Email: estimating@currancontracting.com
    $2,049,587.62

  • 3706 Martin & Company Excavating
    2456 E. Pleasant Grove Road
    Oregon, IL 61061
    P.O. Box 443
    Oregon, IL 61061
    Phone: (815) 732-2422 Fax: (815) 732-2092 Email: info@martincoinc.net
    $2,221,452.97

Non Bidders

  • No requests received
Pay Item # UOM Description Type Quantity Unit Price
40600290 POUND BITUMINOUS MATERIALS (TACK COAT) Base items 59,027.000
40600370 FOOT LONGITUDINAL JOINT SEALANT Base items 28,767.000
40600900 TON HOT-MIX ASPHALT BINDER COURSE (HAND METHOD), N50 Base items 100.000
40600990 SQ YD TEMPORARY RAMP Base items 393.000
40602978 TON HOT-MIX ASPHALT BINDER COURSE, IL- 9.5, N50 Base items 7,428.000
40604060 TON HOT-MIX ASPHALT SURFACE COURSE, IL-9.5, MIX "D", N50 Base items 7,449.000
40800050 TON INCIDENTAL HOT-MIX ASPHALT SURFACING Base items 749.000
44000160 SQ YD HOT-MIX ASPHALT SURFACE REMOVAL, 2 3/4" Base items 88,423.000
44201729 SQ YD CLASS D PATCHES, TYPE II, 7 INCH Base items 75.000
44201733 SQ YD CLASS D PATCHES, TYPE III, 7 INCH Base items 110.000
44201735 SQ YD CLASS D PATCHES, TYPE IV, 7 INCH Base items 600.000
48102100 TON AGGREGATE WEDGE SHOULDER, TYPE B Base items 1,772.000
67000400 CAL MO ENGINEER'S FIELD OFFICE, TYPE A Base items 4.000
67100100 L SUM MOBILIZATION Base items 1.000
70100450 L SUM TRAFFIC CONTROL AND PROTECTION, STANDARD 701201 Base items 1.000
70100460 L SUM TRAFFIC CONTROL AND PROTECTION, STANDARD 701306 Base items 1.000
70100600 L SUM TRAFFIC CONTROL AND PROTECTION, STANDARD 701336 Base items 1.000
70107025 CAL DA CHANGEABLE MESSAGE SIGN Base items 30.000
70300100 FOOT SHORT TERM PAVEMENT MARKING Base items 8,601.000
70300150 SQ FT SHORT TERM PAVEMENT MARKING REMOVAL Base items 2,867.000
72000100 SQ FT SIGN PANEL - TYPE 1 Base items 382.000
72000200 SQ FT SIGN PANEL - TYPE 2 Base items 43.000
72400310 SQ FT REMOVE SIGN PANEL - TYPE 1 Base items 375.000
72400320 SQ FT REMOVE SIGN PANEL - TYPE 2 Base items 43.000
72400710 SQ FT RELOCATE SIGN PANEL - TYPE 1 Base items 48.000
72800100 FOOT TELESCOPING STEEL SIGN SUPPORT Base items 216.000
73000100 FOOT WOOD SIGN SUPPORT Base items 454.000
78000200 FOOT THERMOPLASTIC PAVEMENT MARKING - LINE 4" Base items 79,850.000
78000500 FOOT THERMOPLASTIC PAVEMENT MARKING - LINE 8" Base items 233.000
78000600 FOOT THERMOPLASTIC PAVEMENT MARKING - LINE 12" Base items 167.000
78000650 FOOT THERMOPLASTIC PAVEMENT MARKING - LINE 24" Base items 66.000
78011025 FOOT GROOVING FOR RECESSED PAVEMENT MARKING 5" Base items 79,850.000
78011045 FOOT GROOVING FOR RECESSED PAVEMENT MARKING 9" Base items 233.000
78011065 FOOT GROOVING FOR RECESSED PAVEMENT MARKING 13" Base items 167.000
78011125 FOOT GROOVING FOR RECESSED PAVEMENT MARKING 25" Base items 66.000
78300200 EACH RAISED REFLECTIVE PAVEMENT MARKER REMOVAL Base items 167.000
X0326899 EACH SOLAR-POWERED FLASHING BEACON ASSEMBLY (COMPLETE) Base items 4.000
X4401196 SQ YD HOT-MIX ASPHALT SURFACE REMOVAL- LONGITUDINAL JOINT Base items 240.000
X7820007 EACH GUARDRAIL REFLECTORS, TYPE C (SPECIAL) Base items 30.000
Z0013798 L SUM CONSTRUCTION LAYOUT Base items 1.000
No More Pay Items

The contract details above are for informational purposes only until the Plans and Special Provisions are posted on this web page. If an addendum is posted, the contract details above may be revised. Please continue to check for addenda.